Electrical Equipment

Cable

First step - development of the scheme

First, we need to assess the location itself, its saturation with electrical devices. The electrical connections in the private house should be designed to take into account all minor details, such as pinks in the right places and switches.

If there is no special obstacle, we recommend that all electrical equipment be made available in the appropriate locations, either mentally or schematically. That's what you're going to be pushing away by developing spaces for pink. Also select suitable places for switches so that all residents of the house can manipulate them.

Some things require a special connection to the grid. One requires pinks of 380 volts, other non-standard pinks. Take all the details in your plan.

Further, it is necessary to contact the specialists to calculate the quantity and quality of cables and wires required for you. Quality means the type and section of wires. The thing is, you're not gonna be able to read it right, it's very risky, because you can stay out of light, but you can also get life-threatening injuries. Trust this phase of high-level electricity, which will help to correctly install electricity in the private house.

Phase II - Purchase of materials and dismantling of old wire

After you planted the wiring pattern, and the professionals estimated how many and what wires and other equipment needed to be bought, you can proceed to dismantle the old wire. Be careful, remove the voltage on the power grid of the premises before work begins.

Council! Purchase only the test manufacturers, because good wire is the key to your safety! We're recommending that you buy an intranet store. wire and cable- of a better quality:

After dismantlement of an old one (if you don't do zero), you can proceed to the preparatory phase before the installation of a new wire. Here, you have to work on every wire, and run special channels and openings where necessary. The Council shall use a manual strobard to prevent damage to the surrounding materials. If you have to do a cable in the wall, you will be armed with a Bulgarian with a special lap on concrete.

Plumbing in the private house with his hands

This is the third stage of all work. There are several ways to lay wires in the house. And each of them has its positive and negative sides. Let's specifically stop at each of the following: